High quality and high cost performance Metal Gear . Weight: 13.6g Dimension: 22.8*12.2*28.5mm Stall torque: 1.8kg/cm(4.8V )2.2kg/cm(6V) Operating speed: 0.1sec/60degree(4.8v), 0.08sec/60degree(6v) Operating voltage: 4.8-6.0V Dead band width: 5us Connector wire length: 150mm servo come with arm set.
Sale
9G Metal Gear Micro Servo Motor Tower Pro
₹399.00 ₹220.00
Working Torque: 2kg/Cm Reaction Speed: 0.11 Seconds / 60 Degrees (4.8v)
Servo: Digital Servo Operating Voltage: 4.8v- 6v Structural Material: Metal gear Coreless Motor DUAL BALL Axle Bearing Fit for ALL kind of R/C Toys
Operating speed: 0. 1sec/60degree(4. 8v), 0. 08sec/60degree(6v).
Stall torque: 1.8kg/cm(4. 8v )2.2kg/cm(6v).
Weight: 13.6g servo come with arm set.
In stock
| Weight | 0.1 kg |
|---|---|
| Dimensions | 20 × 15 × 5 cm |
- Shipping Time:- Our orders are shipped within 24 Hours.
- Delivery Time:- 2-5 Days (Anywhere in India), 7-10 Days for remote location
- Shipping Partner:- FedEx, Delhivery, XpressBees, Ecom Express, E kart Logistics, for remote location we use India Post.
Related products
Sale
In stock
MG995 – Tower Pro Servo – 180 Deg
MG995 Standard Mini Micro Servo Gear
Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GW...
Sale
In stock
- L293D motor driver IC.
- Male burg stick connectors for supply, ground and input connection ...
Sale
In stock
TB6560 Stepper Motor Driver Controller
- Driver Chip: TB6560AHQ
- Operating Voltage: 10-35V
- Nominal Voltage: 24V
- Wi...
Sale
In stock
PDI-HV5932MG-180 32KG 180 Angle Metal Gear HV Digi...
180 degree rotation. Controllable angle range from 0 to 180 degrees.
The middle case of the servo is made of aluminum ...
Sale
In stock
Sale
In stock
S3003 – Futaba Servo Motor-180-degree
tall Torque (6.0V): 4.1 kg.cm, Stall Torque (4.8V): 3.2 kg.cm
Operating Voltage: 4.8-6.0 Volts,
Operating Speed (6.0V): ...
Sale
In stock
Sale
In stock
- Maximum motor supply voltage: 36V
- Maximum motor supply current: 600 mA per motor
- Onb...
Sale
In stock
Gear Type: Metal gear
Power Supply: Through External Adapter
Servo arms & screws included and fit with Futaba servo ...
Sale
In stock
EMAX ES3005 4.8V-6V Metal Analog Servo Waterproof ...
Signal: Analog
Speed @ 4.8v: 0.16 sec/60°
Speed @ 6v: 0.14 [email protected]°
Torque @ 4.8v: 10 kg.cm
Torque @ 6v: 12 kg.cm...
Sale
In stock
16-Channel 12-bit PWM/Servo Driver I2C interface P...
Adjustable frequency PWM up to about 1.6 KHz
12-bit resolution for each output – for servos, that means about 4us res...
Sale
In stock
MG995 – Tower Pro Servo – 360 Deg
MG995 Standard Mini Micro Servo Gear
Compliant with most standard receiver connector: Futaba, Hitec, Sanwa, GW...
Sale
In stock
Servo Motor Tester/Servo Tester ESC CCPM
Voltage Consumption: DC 4.8V - 6V
Output Signal: 1.5ms ± 0.5ms...
Sale
In stock
N20 DC Motor 100 RPM Micro Metal Gear-box
Lightweight, high torque and low RPM.
Fine craftsmanship, durable, not easy to wear.
With excellent stall characterist...
Sale
In stock
MG996R – Tower Pro Servo – 360 Deg
Metallic gears, standard size, high torque
Suitable for arduino, raspberry pi and node mcu.
Original tower ...
Sale
In stock
On-board LM358 chip
Adjustable gain up to 100x
On-board 10K adjustable resistor for gain adjustment
On-board power in...
Sale
In stock
DRV8825 Stepper Motor Driver Module
This product is a carrier board or breakout board for TI?s DRV8825 stepper motor driver; we therefore recommend careful ...
Sale
In stock
SG90 is high torque motor which is commonly used in robotics and several other applications due to the fact that it's e...
Sale
In stock
Solenoid Electromagnet Push Pull DC 12V 12mm
High quality ultra-compact electric lock.
Easy to install for the electric door lock or
other automatic door lock syst...
Sale
In stock
Micro Mini 020 Square bare electric Motor DC 3V 72...
[Voltage]: 3v
[Axis diameter]: 1.5mm (matching gear)
[shape]: 18*19*9.7mm
[Measured]: 3V voltage test, no-load curren...
Sale
In stock
S3003 – Futaba Servo Motor 360-degree
tall Torque (6.0V): 4.1 kg.cm, Stall Torque (4.8V): 3.2 kg.cm
Operating Voltage: 4.8-6.0 Volts,
Operating Speed (6.0V): ...
Sale
In stock
Working Torque: 2kg/Cm Reaction Speed: 0.11 Seconds / 60 Degrees (4.8v)
Servo: Digital Servo Operating Voltage:...
Sale
In stock
Dynamo Motor / DC Mini Electric Motor / Flat Cylin...
Rated Voltage: 3.0VDC , RPM: 4800 r/min
Voltage：1.0～3.0V DC
No load current：110mA max...
Sale
In stock
MG996R – Tower Pro Servo – 180-degree
Metallic gears, standard size, high torque
Suitable for arduino, raspberry pi and node mcu.
Original tower...
Sale
In stock
A4988 Stepper Motor Driver Module
The A4988 is a complete Microstepping Motor Driver with built-in translator for easy operation. The driver has a maximum...
Sale
In stock
- The logical part of the input voltage VD: 5V
- Driven part of the input voltage VS: VIN Input 6.5 ...
16-Channel 12-bit PWM/Servo Dr...
₹399.00 ₹320.00
Micro Mini 020 Square bare ele...
₹150.00 ₹120.00