- Selectable 10SPS or 80SPS output data rate Simultaneous 50 and 60Hz supply rejection Current consumption including on-chip analog power supply regulator: normal operation < 1.5mApower down < 1uA Operation supply voltage range: 2.6 ~ 5.5V Operating Temperature Range:-20 degree ~ +85 degree
Sale
10Kg Load Cell + HX711
₹550.00 ₹450.00
- 1X Weight Sensor 10KG 1 X HX711 24BIT Precision ADC Module Connection: Red to E+ Black to E- Green to A+ White to A- On-chip active low noise PGA with selectable gain of 3264 and 128 On-chip power supply regulator for load-cell and ADC analog power supply On-chip oscillator requiring no external component with optional external crystal
In stock
| Weight | 0.1 kg |
|---|---|
| Dimensions | 20 × 15 × 05 cm |
- Shipping Time:- Our orders are shipped within 24 Hours.Â
- Delivery Time:- 2-5 Days (Anywhere in India), 7-10 Days for remote location
- Shipping Partner:- FedEx, Delhivery, XpressBees, Ecom Express, E kart Logistics, for remote location we use India Post.
Related products
Sale
In stock
BME280 -3.3 Precision Altimeter Atmospheric Pressu...
- Supply voltage VDD main supply voltage range: 1.71 V to 3.6 V
- VDDIO interface voltage ra...
Sale
In stock
BMP180 Barometric Pressure Sensor Module
Bmp180 Digital Barometric High Precision Pressure Sensor Board Module The Bmp180 Is A High-Precision Pressure Sensors, S...
Sale
In stock
Tilt Sensor Vibration Alarm Vibration Switch Modul...
- Operating Voltage: 3.3~5VDC
- Ball Rolling type of tilt sensor
- This small module is ea...
Sale
In stock
Small sensor can detect horizontal tilt, vertical flip, shock and vibration. It is formed by two contacts and two small...
Sale
In stock
A simple Flex Sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases.
...
Sale
In stock
BMP280 Barometric Pressure Sensor Module
Techtonics BMP280 Barometric Pressure and Atmospheric Sensor Module 3.3V
BMP280 Pressure Sensor Module
Pre...
Sale
In stock
Tilt Sensor Module for Arduino
Adjustable sensitivity
Sensor can sense changes in body angle...
Sale
In stock
Load cell?Sturdy aluminum alloy construction with strain gauges pre-attached with strain relieved wires. Accurate measur...
Sale
In stock
Sale
In stock
IRF520 MOSFET Driver Load Switch Module
Output load voltage: 0-24 V.
Voltage: 3.3 ? 5V.
Output load current: <5A...
Sale
In stock
VCC ↔ 2.3V ~ 5.3V
Features wide range voltage comparator LM393
Adjustable sensitivity
Output form digital switch ou...
Sale
In stock
FSR402 Force Sensitive Resistor 0.5 Inch FSR Press...
The Force sensitive range: 100 g to 10 kg
Sensing the diameter: 0.5"...
Sale
In stock
Vibration Tilt sensor module alarm Motion sensor m...
Operating voltage 3.3V ~ 5V
Output format: digital switching output (0 and 1)
Using a wide voltage LM393 comparator
W...
Sale
In stock
Operating voltage: 4.5V to 28V (typically 5V)
Output Current: 25mA
Can be used to detect both the poles of a magnet
O...
In stock
Sale
In stock
Easily customizable to a wide range of sizes
Cost-effective
Simple and easy to Integrate....
Sale
In stock
voltage comparator chip and vibration sensing probe
Support 5v/3.3v voltage input
On-board the output signal indicatio...
Sale
In stock
Specification : Comprehensive error: 0.02% F.S Sensitivity: 1.0 0.1mv / v Nonlinearity: 0.02% F.S Hysteresis: 0.02% F.S ...
Sale
In stock
SW-420 Vibration Sensor Module
1. Using SW-420 normally closed type vibration sensor
2. Comparator output, clean signal, good waveform, strong driving...
Sale
In stock
- Product type: Piezoelectric sensor
- Colour: copper and silver
- Dimension: 35 mm ...
Sale
In stock
801S Highly Sensitive Vibration Sensor (Set of 2)
- Product name: vibration sensor<...
Sale
In stock
Using a sensor with external resistors full bridge measurement range of a sensor range: 50kg; Higher requirements for e...
SW-420 Vibration Sensor Module
₹199.00 ₹150.00
Load Cell – 100 Kg
₹999.00 ₹950.00