Sensor and Sensor Modules - Light, Sound & Colour
Sensor and Sensor Modules - Light, Sound & Colour
5mm LDR - Light Dependent Resistor
Diameter: 5mm No. of Pins: 2 Type of Mounting: PCB Through Hole Maximum Operating Temperature: +800°C (Approx.) Dark resistance:1-20 Mohm When light falls upon it then the resistance changes. Values of the resistance of the LDR may change over many...
Rs. 15.00
Rs. 8.00
3 pin LDR Light Sensor Module
Can detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment) Operating voltage 3.3V-5V Output Type Analog voltage output -A0 Digital switching outputs (0 and 1) -D0 With fixed bolt hole for easy installation Small board PCB...
Rs. 150.00
Rs. 38.00
Sound Detection Sensor Module
Main chip: LM393, Electret condenser microphone Working voltage: DC 3.3-5V Induction distance is 0.5M Signal output Indication Single channel signal output The output effective signal is low level. Uses LM393, Electret condenser microphone Signal output Indication Single channel signal output The...
Rs. 150.00
Rs. 49.00
5mm LDR Metal Casing- Light Dependent Resistor
Diameter : 5mm Number of Pins : 2 Material : Metal Case Max Voltage : 150 Vdc Max Power : 100mW Ambient Temperature : -30 deg C ~ 70 deg C Spectral Peak : 540nm Light Resistance at 10Lux :...
Rs. 65.00
Rs. 49.00
4 Pin LDR Light Sensor Module with analog pin
It comes with Mounting Hole Screw. Easy to install Signal output indicator light. LDR module 4 PIN Able to detect ambient brightness and light intensity Adjustable sensitivity (via blue digital potentiometer adjustment) Output: DO digital switch output (0 and 1),...
Rs. 120.00
Rs. 39.00
12mm LDR - Light Dependent Resistor
Photoresistors, also known as light dependent resistors (LDR), are light sensitive devices most often used to indicate the presence or absence of light, or to measure the light intensity .
Rs. 50.00
Rs. 35.00
TDA2030A 6-12V 18W Audio Amplifier Module
Onboard TDA2030A Audio amplifier IC Mono channel 18W Power amplifier circuit design Onboard horn socket Onboard power indicator light Want to increase the audio output capability of your project? Well, then this is the perfect module for you. This module...
Rs. 200.00
Rs. 99.00
Rs. 200.00
Rs. 179.00
ISD1820 Record and Playback Module Voice Board With On Board Mic and Loud Speaker
The main chip: ISD1820. Operating Voltage: DC 3V-5V. Loudspeaker: 8Ω, 0.5W. An easy to use 10 seconds of voice recording. High-quality, natural voice restored. Can be used as a propaganda module.--This module uses the ISD1820 voice record and playback IC...
Rs. 200.00
Rs. 179.00
20mm LDR - Light Dependent Resistor
With such a wide variation in resistance, LDRs are easy to use and there are many LDR circuits available.--When light falls upon it then the resistance changes. Values of the resistance of the LDR may change over many orders of...
Rs. 100.00
Rs. 80.00
Rs. 380.00
Light Control Sensor / Automatic Light Based Sensor Switch Useful in Automatic Street Lighting
Photo control light-based sensor - Opens during the day, and switches off in the evening, automatically Input Voltage: AC 220V, Max Load Current: 10A Frequency: 50-60Hz Reliable, small size, light weight, easy to install Widely used in street lighting, highways,...
Rs. 380.00
7mm LDR - Light Dependent Resistor
Diameter 7 mm
Dark resistance max. 20MΩ
Maximum Watts(W) 200 mW
Maximum Voltage(V) 250 VDC--A cadmium sulphide light dependent resistor (LDR), also known as photoresistor, photocell. Its resistance goes up in dark and goes down in light.
Rs. 20.00
Rs. 15.00
LM386 Audio Amplifier Module
Onboard LM386 Chip. 200 multiplier benefits circuit design. On-board speaker wiring Block. On-board 10K variable resistor, you can adjust the volume of the enlarged. Onboard power indicator. -- If your project needs an audio amplifier, this module should be...
Rs. 139.00
Rs. 99.00
5 Channel Flame Sensor Module
5-Channel Flame Sensor Module is a 5 channel flame detector module used to detect flame in the larger area( >120 degrees). Features : Analog and digital Dual outputs On-board potentiometer and indicators 1% resistors to make this module more reliable and...
Rs. 599.00
Rs. 249.00
LM393 Sound Detection Sensor Module – Black
Working voltage: DC 3.3-5V. IC Chip: LM393 Signal output indication. The output is digital. Single channel signal output. With the retaining bolt hole, convenient installation. Output low level and the signal light when there is sound. LM393 Sound Detection...
Rs. 150.00
Rs. 69.00
LDR with Relay Photosensitive Resistance Sensor Relay Module
Adjust the sensitivity with the potentiometer. Set the start relay threshold by adjusting the potentiometer. When it is brighter, the module relay pulls in. When the threshold is dark, the relay is disconnected. Operating Voltage: 3.3V – 5V. It...
Rs. 520.00
Rs. 349.00
GY-30 BH1750 Digital Light Intensity Illumination Sensor Module
Digital Light intensity detection module: GY-30 Chip : BH1750FVI Power supply: 3V-5V power Light range 0-65535 lx Sensor built-in : 16 bitAD converter Direct digital output, bypassing the complex calculation, bypassing the calibration Don't distinguish between ambient light Close to...
Rs. 499.00
Rs. 199.00
GY-31 TCS3200 Color Sensor Recognition Module
The TCS3200 Color Recognition Sensor Module uses a high-quality light sensor allowing you to sense any color through a combination of Red, Green, and Blue. The module provides all of the pins of the TCS3200 on convenient 0.1″ headers –...
Rs. 850.00
Rs. 599.00
CJMCU-34725 TCS34725 Color Sensor RGB Module
Operating Voltage: 3.3V Supply Voltage: 3.3V-5V The TCS3472 device provides digital return values for red, green, blue (RGB) and bright light sensing Color management is more accurate. The high sensitivity. Wide dynamic range. IR shading filters make the TCS3472 ideal....
Rs. 550.00
Rs. 349.00
Analog Sound Sensor Microphone Module for Arduino
Detectable sound signal size Built-in filter-rectifier circuit, DC signal output Good sensitivity, built-in amplifier circuit, adjustable gain Voltage signal for sound intensity can be obtained by AD conversion Analog voltage signal output, signal amplitude VCC/2 Compatible for Arduino sensor interface....
Rs. 250.00
Rs. 189.00
Rs. 850.00
Rs. 399.00
Color Recognition Sensor Detector Module With 4-Bit Analog Output Colour Sensor
Colour Recognition Sensor Module It is a widely used colour detecting sensor made in India. This colour sensor was designed to detect the colours of things based on their ADC values. It delivers a 4-bit analog value of the photodiode,...
Rs. 850.00
Rs. 399.00
CJMCU TEMT6000 An Ambient Light Sensor
AEC-Q101 qualified High photosensitivity Near-Human Eye Spectral Response Scalable Output Voltage Adapted to human eye responsivity Lead (Pb)-free reflow soldering Compliant to RoHS Directive 2002/95/EC and inaccordance to WEEE 2002/96/EC This CJMCU-TEMT6000 An Ambient Light Sensor module uses a special...
Rs. 550.00
Rs. 199.00
SparkFun Spectral Sensor Breakout AS726X
6 visible channels: 450nm, 500nm, 550nm, 570nm, 600nm and 650nm, each with 40nm FWHM Visible filter set realized by silicon interference filters 16-bit ADC with digital access Programmable LED drivers 2.7V to 3.6V with I2C interface 2x Qwiic connectors The...
Rs. 4,500.00
Rs. 3,499.00
ISD1820 Record and Playback Module
Features Operating Voltage: Wide power supply ranges from 2.4V to 5.5V DC With the internal audio amplifier, this board can drive 8 Ohm 0.5W speakers directly. An on-board microphone. Dual operating modes Standalone mode Microcontroller Driven mode Push‐button interface,...
Rs. 190.00
Rs. 149.00
VS1053 Mp3 Audio Module Development Board Recording Module
Has a build-in microphone for sound recording Compatible with the Arduino Uno and Mega Has a micro-SD card holder (the chip on the shield supports FAT16 and FAT32) For pinout see image with pin descriptions (pin descriptions with X refer...
Rs. 1,200.00
Rs. 1,050.00
Showing 1 - 24 of 26 total